e-PDF To HTML Converter

How to convert specific pages PDF to HTML

Posted on

e-PDF to HTML Converter allows you to convert specific pages PDF to HTML very flexibly, which is a good tool for you to select in Windows systems.

HTML format is web page coded in HTML that can be displayed in a Web browser; formats text, tables, images, and other content that is displayed on the page. Most pages within static websites have an ".html" extension.The HTML source code is parsed by the Web browser and is typically not seen by the user. If you want to view the HTML of a Web page, select "View Source" from the Web browser's View menu. Since HTML files are saved in a standard text format, they can be opened and edited with a basic text editor.

After short introduction about HTML format, want to produce HTML files from specific pages PDF files right now? Here are steps to realize them in your own computer of Windows systems:

1. Install

Please download installer of e-PDF to HTML Converter here, and double-click it to follow setup wizard to install it in your computer so that you can use it for later conversion:

Download installer of e-PDF to HTML Converter to convert PDF to HTML

 

2. Set specific pages

After installation, please open its GUI interface on your screen, then click File on toolbar > select Preferences on pop list there, and then, Preferences panel could be opened on screen, where you can set specific pages for PDF files which will be added later:

Click tab General on Preferences panel, then you can see Page Range and From and To, and to set specific pages of PDF files for conversion, you need to click Selected Pages on dropdown list Page Range, and then, edit boxes of From and To could be activated, where you need type page number for setting specific pages, finally, click OK on this panel so that your setting here could be saved directly, and program could help you jump back to GUI interface.

Click File and select preferences to open its panel during converting specific pages PDF file to HTML file Fig. Click File and select preferences to open its panel during converting specific pages PDF file to HTML file

Click general and set specific pages during converting PDF file to HTML file Fig. Click general and set specific pages during converting PDF file to HTML file

 

3. Add PDF files, set targeting folder and convert specific pages PDF file to HTML file

After specific pages setting, please add PDF files and specify destination folder with these ways:

Click File on toolbar > select Open on pop list, so a dialog box could be opened for you where you need to select some PDF files you want to convert later and click open, and by now, PDF files are successfully added, so program offers you another dialog box where you can set targeting folder, and then please click OK there so that e-PDF to HTML Converter could convert specific pages PDF file to HTML file, and targeting HTML files could be added into targeting folder.

So above is description about how to use e-PDF to HTML Converter to convert specific pages PDF file to HTML file through its GUI interface in Windows systems. However, e-PDF to HTML Converter also allow you to convert PDF files to HTML file with command line, so if you are interested in it, please read the following:

1. Open command prompt

Click hotkey Windows + R > type cmd and click ok, then it could be opened directly.

2. Convert specific pages PDF file to HTML file

In opened command prompt window, please refer to following example to type your own commands and parameter:

pdf2html.exe –f 1 –l 3 -i c:\ab.pdf -o c:\ab.htm

(note: pdf2html.exe is to run software through executive file “pdf2html.exe” which is located in where e-PDF to HTML Converter is installed, –f 1 is to specify first page to convert, –l 3 is to specify last page to convert, -i is to specify input file c:\ab.pdf and -o is to specify output file c:\ab.htm)

PS: commands function only works when you purchase full version of this software.

After commands and parameters typed in your own command prompt, you can convert specific pages PDF file to HTML file directly, and then, targeting HTML file from specific pages of PDF file could be produced into targeting folder very quickly.

After you know both GUI and commands ways to convert specific pages PDF file to HTML file, if you want to get trial version of this software, please do not hesitate to try e-PDF to HTML Converter here right now! And for more functions about it, welcome to keep your eye on here.

e-PDF To Text Converter

How to batch convert PDF to TXT and produce BAK files

Posted on

This article is about how to use e-PDF to Text Converter to convert PDF to TXT and produce BAK files during one conversion on Windows platforms.

About e-PDF to Text Converter

e-PDF to Text Converter can be used to extract text from PDF file to TXT file singly or in batches. Also with its easy-to-use GUI interface, you can also edit TXT options, e.g., TXT encoding, TXT original layout retaining, simple HTML code, etc. during related conversions. Thus, if you have any interest in this software by now or later, welcome to try it freely here:

Download e-PDF to Text Converter to convert PDF to TXT

More details about using this software to convert PDF file to TXT file and produce BAK files could be found at here:

1. Open GUI interface to monitor PDF directories

After you run e-PDF to Text Converter in your computer, its GUI interface could be opened directly. And you need to firstly click File on toolbar > select Monitor A Special Directory (Running) on dropdown list so that its relevant panel could be opened directly. And snapshot below is about related steps to open panel of producing BAK files mentioned above:

Monitor directory for batch convert PDF to TXT and produce BAK files2. Batch convert PDF file to TXT file and produce BAK files

After you open this panel like below, please click Add button there, then there could be a dialog box named Setting popping out, and for us, please click Browse button there > select one folder containing PDF files you want to process entirely in pop dialog box > click Ok there, so source directly could be added, and then, please use the same way to add targeting directory in related edit-box. And finally, when both of source and targeting directories are added successfully in Setting panel, please click OK there so that program takes you back to PDF E-Book Maker panel, which is just one shown in following snapshot:

Input source directory and output directly during batch converting PDF to TXT and produce BAK files

And you can see, source and destination directories are all successfully added. However, to change one of directories here, please click Modify so that you can re-type right path of folder and get right directory. Finally, to make e-PDF to Text Converter batch convert PDF file to TXT file and produce BAK files, please click OK on this panel, and later on, targeting TXT files and PDF BAK files could be produced into destination folder directly.

Here is relevant snapshot about BAK files icons and TXT files icons below:

Example BAK files icons and TXT files icons after batch converting PDF to TXT

To know more articles about other functions of e-PDF to Text Converter, please keep concentrating on here.

e-PDF To Text Converter

How to singly or batch convert password protected PDF to text/TXT

Posted on

e-PDF to Text Converter can not only convert normal PDF to text/TXT, but also batch convert password protected PDF file to text/TXT on Windows platforms.

Here are details to use this software to singly or batch convert password protected PDF file to text/TXT:

1. Install software

Please download installer of this application from following entrance, then double click it and follow setup wizard to install software directly in your computer.

Download installer of e-PDF to Text Converter

2. Add PDF files for conversion

After installation is finished, please open its GUI interface and add PDF files through:

Click Add File(s) on GUI interface > select PDF files and click open in dialog box, then PDF files could be added as paths in processing table, which is as shown as following snapshot:

 

GUI interface of e-PDF to Text Converter to convert PDF to text

3. Set targeting folder

In this step, you need to open e-PDF to Text Converter v2.1 panel after you add PDF files correctly:

Click Setting on GUI interface so that this panel could be opened on screen, which is as shown as what is in following snapshot. Then, please click tab Save Text Mode so that its own panel can be opened directly. Then, you need to click one of radios according to your need, e.g., saving text file in original folder of PDF files, etc..

Set targeting folder during converting PDF to text

4. Type PDF password for convert password protected PDF later

When you finish setting destination folder, please click tab Password Settings there, then in its own panel, please click check box Use same passwords for all PDFs, then all edit-boxes could be activated. And then, you can type user password and owner password of your added PDF file into related edit-boxes as shown in the following snapshot.

Type passwords during singly or batch converting PDF to text Finally, when you think it is enough to edit properties of text file and finished to type PDF passwords, please click OK there so that your setting on this panel could be saved and also you can go back to GUI interface again.

5. Convert password protected PDF file to text/TXT

When you are on GUI interface of this application again, click Convert PDFs there so that e-PDF to Text Converter could help you singly or batch convert password protected PDF file to text/TXT file.

It is convenient to use e-PDF to Text Converter to singly or batch convert password protected PDF file to text/TXT through GUI interface. If you think this software can match your need, please experience trial version of e-PDF to Text Converter.

e-PDF To Text Converter

How to convert PDF to text/TXT and generate simple HTML code

Posted on

e-PDF to Text Converter allows you to convert PDF to text/TXT and generate simple HTML code into text/TXT file on Windows platforms.

e-PDF to Text Converter is a great GUI application that enables Windows users to convert PDF files to text files and set targeting properties of text files, e.g., simple HTML code, output encoding, retaining original codes, etc. flexibly. With its simple GUI interface, this smart and small utility can help you more on producing text files with popular properties from PDF files singly or in batches.

After you know general information about this software, welcome to freely try it:

Download e-PDF to Text Converter to convert PDF to text

And here are steps to use e-PDF to Text Converter to convert PDF file to text/TXT file and generate simple HTML code into text file:

1. Open GUI interface and add PDF files through:

Click File > select Add Directories on pop list > choose PDF files in pop dialog box > click open there, then selected PDF files could be added into processing table directly. Or you can click Add File(s) on GUI interface > select PDF files and click open in pop dialog box. Or drag PDF files from one folder into another folder directly. Below is GUI interface containing added PDF files:

GUI interface of e-PDF to Text Converter that containing added PDF 2. After adding PDF files, please click Setting on GUI interface so that you can set simple HTML code issue:

Click Setting > select tab Base Setting, so you can get its own panel containing some properties, which could be shown like below. Then, to produce simple HTML code, please click related check-box Produce Simple HTML directly, so software can know you want to generate HTML code later.

image 3. After setting is successful like above, please click tab Save Text Mode, then choose one of saving modes there, for instance, you can click second radio so that targeting folder could be original folder of PDF files and when conversion is finished later, targeting text files could be saved

Set targeting folder during converting PDF to text/TXT After you successful setting on this panel, please click OK so that program can take you back to GUI interface again.

4. When you get back to GUI interface, please click Convert PDFs there, then based on your setting mentioned above, e-PDF to Text Converter will help you convert PDF file to text/TXT file and generate simple HTML code into targeting text/TXT file directly, and this text/TXT file could be found at targeting folder.

More articles about e-PDF to Text Converter, please keep visiting here. Thank you for your support here.

e-PDF To Text Converter

How to convert PDF to text/TXT and edit output encoding

Posted on

With e-PDF to Text Converter, it is simple to convert PDF to text/TXT and edit output encoding one time in Windows systems.

Sometimes, we could not only need to produce text files from PDF files, but also need to set output encoding during related conversions, so this software -- e-PDF to Text Converter helps Windows users convert PDF files to text files singly or in batches. Also, for text properties, this software could be used to accomplish it, too. Of course, this application allows you to do lots of operations besides basic conversion from PDF file to text file and setting output encodings. More information about this application could be found at its related homepage.

Here you can get its trial version to try this software directly:

Download e-PDF to Text Converter to convert PDF to text After you download installer and install e-PDF to Text Converter in your computer, please open its GUI interface and start to convert PDF file to text/TXT file and set output encoding:

1. Add PDF files

After opening GUI interface, please add PDF files with one of following methods:

  • Click File > select Add Directory > select one folder in pop dialog box > click ok, then all PDF files in this folder could be added into conversion
  • Click Add File(s) > select PDF files in pop dialog box > click open, and then, selected PDF files could be shown as paths in processing form
  • Drag PDF files from one folder to processing table of GUI interface, and PDF files could display in processing form directly, too

Here is related GUI interface with added PDF files below:

Add PDF files during converting PDF to text through GUI interface2. Set output encoding mode and targeting folder

Please click Setting on GUI interface, then you can get its pop panel on screen. Then, please click tab Base Setting > move your mouse onto Output Encodings > click one of radios ASCII7, Lantin1 and UTF-8, so your own output encoding could be one of them.

Set output encoding during converting PDF to text and outputing encoding Then, you need to set targeting folder:

Click tab Base Setting > select one of three saving modes there so that produced text files could be saved in selected folder you selected here later after conversion. And in the end, after correct setting on this panel, please click OK there, and program can save these settings and help you go back to GUI interface.

 

3. Convert PDF file to text file and output specific encoding

After you go back to GUI interface, it’s time to make this application start to convert PDF file to text/TXT and output specific encoding:

Click Convert PDFs on GUI interface, then e-PDF to Text Converter helps you convert PDF file to text file and output specific encoding directly.

Extension Knowledge about ASCII7, UTF-8:

ASCII is the American Standard Code for Information Interchange. It is a 7-bit code. Many 8-bit codes (such as ISO 8859-1, the Linux default characterset) contain ASCII as their lower half. The international counterpart ofASCII is known as ISO 646.

UTF-8 (UCS Transformation Format—8-bit) is a variable-width encoding that can represent every character in the Unicode character set. It was designed for backward compatibility with ASCII and to avoid the complications of endianness and byte order marks in UTF-16 and UTF-32. UTF-8 has become the dominant character encoding for the World-Wide Web, accounting for more than half of all Web pages. The Internet Engineering Task Force (IETF) requires all Internet protocols to identify the encoding used for character data, and the supported character encodings must include UTF-8. The Internet Mail Consortium (IMC) recommends that all e-mail programs be able to display and create mail using UTF-8. UTF-8 is also increasingly being used as the default character encoding in operating systems, programming languages, APIs, and software applications.