E-PDF Document Converter - PDF Document Center

How to convert multiple Word files into single PDF file

December 7, 2012December 10, 2012

Please use e-PDF Document Converter to convert multiple files of Word to PDF file on Windows platforms.

e-PDF Document Converter is a smart product that dynamically convert MS Office 97/2000/XP/2003, WordPerfect, HTML, AutoCAD DWG, PostScript, EPS, PDF, MS Visio and many other document types to PDF, PostScript, EPS, JPEG, TIFF, PNG, PCX and BMP etc formats, which is general description. Then, to know more of this software, welcome to visit its homepage from hyperlink above.

To get trial utility here, just download trial version of e-PDF Document Converter directly.

And then, for details about how to use this software to convert multiple Word files to single PDF file, just read the followings:

Step1. Run software and add source Word files

Please double-click shortcut of this application, and click Add File(s) on GUI interface, and then, after you select right Word files and click Open in pop dialog box, directories of selected Word files can be shown in processing table directly, and here is related snapshot below:

Of course, this application support adding files with drag and drop, so you can carry out it conveniently.

Step2. Set targeting format and PDF combination mode

After adding Word, click Setting on GUI interface to set targeting format and PDF combination mode with this way:

Click tab Base Setting on pop panel > select .pdf on pop list Output format, then, it is complete to set PDF as targeting format, although software supports other targeting formats, e.g., PS, EPS, TIF, JPG, which can be found in following snapshot:

Click tab Save PDF Mode > select radio Combine Documents into one PDF file under Make PDF files mode, and then, program knows it is essential to combine all added Word files into one PDF file later, and the following snapshot shows more details to set combination mode:

Finally, just one click on OK helps you save settings here and close this panel directly to take you back to GUI interface.

Step3. Convert multiple Word files to single PDF file

After all basic prepared work is finished, just click Start on GUI interface, and then, please just select destination folder in pop dialog box, and click Save, and a few seconds later, single PDF file, which is from multiple Word files, could be produced successfully into destination folder.

To know my result PDF file? Just refer to following snapshot:

As you can see, there are watermarks on produced PDF file, so if you want to remove them, just buy e-PDF Document Converter to process this conversion from Word files to single PDF again.

e-PDF Converter and Creator Printer

How to print PS or print PDF with properties by virtual printer

December 6, 2012December 6, 2012

This article aims to show you how to use e-PDF Converter and Creator Printer to print PS or print PDF with properties by virtual printer on Windows platforms.

e-PDF Converter and Creator Printer is a PDF, PS, EPS, TIFF, BMP, JPEG, ... formats printer driver that can be used to create high-quality and searchable PDF files from any Windows application. e-PDF Converter and Creator Printer installs itself as a virtual Printer. You can go to its homepage to know more about this software.

And right now, if my short description here arises your interest of trying this tool, please feel free to download installer of e-PDF Converter and Creator Printer, and then, double-click this installer and follow setup wizard to install it in your computer directly.

And of course, this software supports printing PS and printing PDF with properties by virtual printer, so, next, the following paragraphs are mainly to tell you how to realize them flexibly:

Step1. Set targeting properties in advance on virtual printer

To set PDF or PS properties, please click icon of this installed printer in panel Printers and Faxes with right button of mouse, and then, click Printing Preferences on dropdown list in order to open its panel, which is as shown as first picture below:

As you can see, in this panel, under tab Layout, orientation of targeting file could be set as Portrait, Landscape or Rotated Landscape; also page order to print could be selected as Front to Back or Back to Front, etc..

Then, to edit other properties, please click tab Paper/Quality, and then, targeting color type, e.g., black and white or colorful, can be selected, as well as paper source, which could be referred to in following snapshot. Then, to set further properties of PDF or PS, just click Advanced button.

In Advanced Options panel, you can set paper size, e.g., A4, etc., edit print quality through DPI, e.g., 600dpi, etc., set scaling of targeting file, e.g., 100% or 88%, etc., and edit PS options, such as PS languages level 3, etc., and you can click related edit-boxes and type them or select them separately to realize settings. And finally, please click OK on this panel to save advanced settings on PDF and PS, and here is snapshot about setting on advanced options panel:

And after you go back on Printing Preferences panel, please click Apply on that panel to apply all setting here, and finally, to close this panel, just click OK directly.

Step2. Print PS or PDF from any printable file with virtual printer

e-PDF Converter and Creator Printer supports printing any printable files to PDF or PS files, here I use example to print web page to PDF/PS to show you how to print them with virtual printer:

Open web page on screen
Click hotkey ctrl + P to open Print panel
On Print panel, just select e-PDF Converter and Creator Printer as destination printer, after you check preview page on the right of Print panel, finally, to set targeting folder and targeting format, please click Print on this panel, and after basic work here is done, printed PDF or printed PS file could be produced into destination folder after process on selected virtual printer

Here is snapshot about how to print web page to PDF or PS with virtual printer:

Here are examples of printed PDF and printed PS file:

At the end of this article, which is about how to use e-PDF Converter and Creator Printer to print PS or print PDF with properties by virtual printer, please do not hesitate to get full version of e-PDF Converter and Creator Printer if you want right now.

e-PDF Converter and Creator Printer

How to set print resolution/DPI during creating PDF with virtual printer

December 5, 2012December 5, 2012

E-PDF Converter and Creator Printer is a great virtual printer for Windows users to create PDF and set PDF print resolution/DPI professionally.

It is so simple to use this software to accomplish what you want here, and to know more about them, just keep reading this article.

Step1. Download and Install

Please download installer of e-PDF Converter and Creator Printer firstly, then, just double-click this installer to follow setup wizard so that finally trial version software could be installed in your computer to use later.

Step2. Set print resolution/DPI in advance

After installation, please open Printers and Faxes panel, then, use right button of mouse to click trial version software icon, and then, select Printing Preferences on pop list, and finally, its panel could pop on screen, where you need to click tab Paper/Quality > click Advanced button there, and here is snapshot about opened preference panel:

After that, another panel named Advanced Options pops on screen, and then, to set print resolution/DPI, please click one of DPIs on dropdown list Print Quality, e.g., 600dpi, etc., finally, to save DPI setting here, please click OK to make this panel disappear directly.

Here is snapshot about how to set print resolution/DPI of PDF below:

Step3. Print specific resolution/DPI PDF with virtual printer

Please find a printable file to print to PDF, e.g., web page, and here are steps to use e-PDF Converter and Creator Printer to print specific resolution/DPI PDF with virtual printer:

Open a web page in your computer
Click ctrl + P to open Print panel on screen
Select e-PDF Converter and Creator on dropdown list Name
Click OK on Print panel

After all basic work is done like above, and finish setting targeting folder in pop dialog box, please click Save there, and later on, you can get your own PDF with specific resolution/DPI in destination folder directly.

Here is snapshot about how to print specific print resolution/DPI PDF below:

Here is snapshot about produced created PDF file with specific resolution/DPI through virtual printer:

created PDF after using virtual printer to create PDF

After you complete creating PDF with virtual printer, to get created PDF without any watermarks, please use full version of e-PDF Converter and Creator Printer.

e-PDF Converter and Creator Printer

How to create PDF and select paper size for output PDF

December 4, 2012December 4, 2012

To know how to create PDF and select paper size for output PDF with virtual printer, just use e-PDF Converter and Creator Printer to fulfill them on Windows platforms.

First of all, please download trial version software from here:

Then, after you install trial version in your computer, just follow steps below to accomplish creating PDF files and selecting paper size for output PDF.

Step1. Run software and set paper size in advance

After you install this virtual printer, it could be found on panel Printers and Faxes. And then, use right button of mouse to click its icon > select Printing Preferences on pop list so that e-PDF Converter and Creator Printing Preferences panel pops on screen. Then, you need to click tab Paper/Quality > click Advanced button under this tab in order to get Advanced Options panel.

Here is snapshot about Preferences panel below:

Then, please click one of paper sizes on dropdown list Paper Size, e.g., A3, etc., then click OK to save setting here and close this panel.

Here is snapshot about panel Advanced Options below:

After you go back to Preferences panel, please click Apply on this panel in order to apply setting in virtual printing setting in advance.

Step2. Set e-PDF Converter and Creator Printer as targeting virtual printer and start outputting PDF with paper size

After basic setting on virtual printer, just print any printable file to PDF, for instance, print web page to PDF file with specific paper size, and you can do the followings to realize them:

Open a web page in your computer
Click hotkey ctrl + p to open Print panel
Click e-PDF Converter and Creator in dropdown list Name under Printers on Print panel
Click OK

Then, after a while, program provides a dialog box, where you can set targeting folder, and after you click save, e-PDF Converter and Creator Printer creates PDF and select paper size with virtual printer.

Here is snapshot about creating PDF from web page with virtual printer:

After illustration about simple operation on e-PDF Converter and Creator Printer used in creating PDF files with specific paper size, to know more articles here, just keep visiting here. For more concerns about this application, welcome to leave your comments. For full version application, just go to purchase page through following entrance:

e-PDF Converter and Creator Printer

How to print PDF of black and white/color by virtual printer

December 3, 2012December 3, 2012

This article shows you how to use e-PDF Converter and Creator Printer to print PDF of black and white or color with virtual printer on Windows platforms.

e-PDF Converter and Creator Printer is multi-functional virtual printer for Windows users to print various PDF files in PDF properties, e.g., colorful PDF or black and white PDF, PDF paper size, PDF size, PDF resolution, PDF scale, etc.. So if you would like to know more about this application and how to print black and white/color PDF with virtual printer, it is a chance to read the following paragraphs here:

Step1. Download and Install

Please download installer of this software from following icon:

Then, double-click installer and follow setup wizard step by step to install software in your computer so that trial version application could be used directly.

Step2. Set printing color – black and white or colorful

After installation, you can find this software in panel Printers and Faxes, and then, you need to set printing color with this way, after you click Printing Preferences on pop list once you use right button of mouse to click its icon there:

Click tab Paper/Quality
Click radio Black & White or Color so that it is finished to set PDF color as black and white or colorful

And here I choose Black and White mode to prepare for later PDF production, and here is snapshot about setting PDF color:

Then, just click Apply to apply your setting here, and click OK to save setting here directly.

Step3. Print PDF with virtual printer

For this application supports various formats files to print to PDF, so here I use an example to print web page to PDF to show you how to fulfill printing PDF:

Open a web page on screen
Click hotkey ctrl + p to open Print panel
Select e-PDF Converter and Creator on pop list Name
Click Ok on Print panel

Then, after you select targeting folder in pop dialog box, please click save there, so after a few seconds, specific color PDF file could be produced into that folder. Here are snapshots about how to print web page to PDF and produced black and white PDF file below:

Finally, thank you for reading this article about how to use e-PDF Converter and Creator Printer to print black and white or colorful PDF with virtual printer, and for full version of this software, welcome to click following icon:

M	T	W	T	F	S	S
	1	2	3	4	5	6
7	8	9	10	11	12	13
14	15	16	17	18	19	20
21	22	23	24	25	26	27
28	29	30	31